Wednesday, September 9, 2020

Dallas VMUG UserCon Speaking

 I had the pleasure of getting invited to have a speaking engagement at the Dallas VMUG UserCon back on August 11th , 2020.  I was asked to be a speaker on August 4th and they wanted everything done by the 7th.  that gave me only 3 days to put together a presentation and record a video. Needless to say it was rushed a little as I did not have a presentation ready.  HA.

https://www.vmug.com/events2/vmug-usercon/2020-dallas-usercon

The presentation I put together was named, " It's the basics that build a better foundation to a better environment".  This session we will be getting back to the basics of vSphere and going over some of the best practices and what they mean to your environment and how they can be deter mental to performance of your infrastructure.

-Cluster Configs

   Plan for server failure (HA)

       An important consideration for cluster design is planning for server failure, or planned                 maintenance.


        Although it is not essential that you configure vSphere DRS , VMware recommends using this                 mechanism as a way of balancing workloads across hosts in the cluster for optimal performance.

-Host General Settings

  • Disconnect or disable any physical hardware devices that you will not be using. These might include devices such as:

    • COM ports

    • LPT ports

    • USB controllers

    • Floppy drives

    • Optical drives (that is, CD or DVD drives)

    • Network interfaces

    • Storage controllers

    • Disabling hardware devices (typically done in BIOS) can free interrupt resources

  • DNS and NTP settings…
  • Scratch Configs

    • It's recommended by VMware to have a persistent scratch location for VMkernel logs in case that ESXi is installed on USB stick or SD card.

    • Remember to redirect the scratch partition, if applicable. In a design that employs SD/USB or boot from SAN as the installation destination, the host installer does not allow for the creation of a scratch partition during the initial setup process. ( ramdisk )

  • Separate vMotion traffic and management traffic onto separate NIC’s
  • Keep hosts Firmware updated 
  • Update ESX with Vendor ISO’s from Vmware
  • Verify Firmware and drivers with Vmware HCL

-Host storage Settings

  • General ESXi Storage Recommendations.

The number of LUNs in a storage array, and the way virtual machines are distributed across those LUNs, can affect performance: 

    • Provisioning more LUNs, with fewer virtual machines on each one, can enable the ESXi servers to simultaneously present more I/O requests to the array. 

    • On the other hand provisioning too many LUNs, especially when many ESXi servers are connected to a single array, can allow the ESXi hosts to simultaneously send so many I/O requests that they fill the array queue and the array returns QFULL/BUSY errors. This can reduce performance due to the need to retry the rejected I/O requests.

  • Queue Depth for HBA’s  ( VMware KB 1267)

    • If the performance of your (HBAs) is unsatisfactory, you can adjust your ESXi hosts' maximum queue depth values. 

    • When you lower this value, it throttles the ESXi host's throughput and alleviates SAN 

    • VMware recommends keeping the HBA Vendors uniform across all hosts participating in a cluster. 

    • If you often observe QFULL/BUSY errors, enabling and configuring queue depth throttling might improve storage performance. 

    • https://www.codyhosterman.com/2017/02/understanding-vmware-esxi-queuing-and-the-flasharray/

  • iSCSI and NFS Recommendations
    • For iSCSI and NFS it’s sometimes beneficial to create a VLAN, if the network infrastructure supports it. This minimizes network interference from other packet sources.

    • Best practice is to have a dedicated LAN for iSCSI traffic and not share the network with other network traffic. It is also best practice not to oversubscribe the dedicated LAN.

    • VMkernel NICs can be placed into teaming configurations. VMware recommendation is to use port binding rather than NIC teaming. iSCSI can leverage VMkernel multipath capabilities such as failover on SCSI errors and Round Robin path policy for performance.

    • Aim to configure as few as possible hardware segments between the servers in a cluster. to limit single points of failure, which is best achieved through simplicity. In addition, too many network hops can cause networking packet delays for heartbeat traffic and increase the possible points of failure.


-Host Security Settings

  • ESXi Host Hardening

To provide an ESXi security baseline, consider the requirements for hardening the hypervisor. 

VMware guidance on security hardening and the recommendation level depends on the rating that corresponds to the operational environment in which it is to be applied. Each service provider will need make their own determination as to the applicability of each level.

    • Lockdown Mode

      • Enable lockdown mode to increase security of ESXi hosts and to further mitigate the risk of unauthorized access to the ESXi console by limiting it to only the appropriate operational team through vCenter Server


-VM Settings

  • Remove unused and unnecessary virtual and/or physical hardware from the VM

    • By disabling devices you are freeing up interrupt resources.  

You also will get an increase in performance by disabling devices that consume extra resources due to polling such as USB adapters and PCI devices which reserve blocks of memory for their operation.  

Also, when using Windows guests be sure to disable optical drives as Windows constantly polls them which can cause issues especially when multiple guests are doing so simultaneously.

  • Keep VMware tools updated.

  • The Paravirtual SCSI (PVSCSI) controller should be used on guest VMs for high performance.
      • The Paravirtual SCSI (PVSCSI) controller should be used on guest VMs for high performance. It is important that users choose the correct PVSCSI controller, because choosing the wrong controller can adversely affect performance.

      • Use multiple SCSI adapters on a VM ( max 4 ) and spread the I/O across those SCSI controllers.

      • Try not to use Paravirtualized for the OS disks.

      • If need more I/O than the default PVSCSI Queue Depth refer to this:

        • Large-scale workloads with intensive I/O patterns might require queue depths significantly greater than Paravirtual SCSI default values (VMware KB 2053145)

  • Snapshots ( are not backups !!  ☺ )
      • Delete old backups




The session went well there were a few questions from viewers, so all in all I guess it went OK.. I have not received any negative feedback from VMUG or anything as of this post.



Monday, February 10, 2020

Well I went to AWS Re-Invent for my speaking session, and I must say that was an adventure. I have been to large conventions before, like VMworld, Dell , etc. This by far was the largest.
I am not sure how many hotels were involved, seemed like every hotel on the strip had something for Re-Invent, from sessions, meals, presentations, or dinning specials for attendee's. I believe there was an estimated 60,000 people in attendance, every session was full that I tried to attend so I spent time on waiting lists, or in line hoping for a spot.
As far as the session I was speaking at, there were allot of seats open, i invited everyone I know or met to attend the session. All in all we got about 25-30 people to attend the session on Zerto. And it let to some good discussions around VM's and protecting them in AWS.
I also tested for AWS Sysops certification, I first took a boot camp the day before and paid additional $225 for, which in my opinion was not worth the money. It did not teach more that I feel i could have gotten offline. The test was challenging not a typical certification teat I have taken before, very in depth and really need to understand how AWS works. Needless to say I did not pass the test I came close I believe within about 5 questions... I am going to study more and take the test again in the next few month's...
I dont think I will go back to Re-Invent unless asked again, it was to many people and could not get into any sessions I wanted to, I will stick o smaller conferences  :-)..

Tuesday, November 26, 2019

AWS re:Invent Speaking Pre-Event

So a few weeks back Zerto asked me to speak at AWS re:Invent as a customer representative and my experience using Zerto. Same as I did back in May 2019 at ZertoCon. I guess the event a ZertoCon was a good one to be asked back to speak for a company I am a customer for and not an Employee.

This will be the first time I have ever been to AWS re:Invent, after logging in and seeing the map of where they plan to have events and the hotels they are setting up rooms for i was surprised as to how large this event will be. The largest event I have ever been to.  The session list is almost overwhelming with the content and how many there are. I did find a few sessions to go to that were not full. i also setup a AWS Certification Boot Camp and a Certification test to take while I am there, so it should be a good trip....

Stay Tuned for a after trip summary and see if I passed my test... :-)

Monday, August 12, 2019

VMware Certifications



VMware Certification

You know I have had my VCP since version 3 and VCAP version 5, but these last few tests have been harder than all of them. The previous tests use to concentrate on either Deployment or Design, with a minor in networking. The latest test DCV -2019 contained a little bit of everything. !!!!

Be sure to follow the exam blueprint to make sure you cover the different parts of the exam that were not part of the exam previously. And there is also some example questions.

Minimally Qualified Candidate:
 The minimally qualified candidate (MQC) has six to twelve months hands-on experience installing, configuring, and managing a vSphere solution. The candidate possesses skills in deploying and administering guest operating systems on a vSphere infrastructure. The successful candidate also has basic knowledge of: storage, networking, hardware, business continuity and disaster recovery, security, environmental monitoring and troubleshooting.

One thing I did notice was the previous tests had 3-5 questions on Auto-Deploy, and not sure if the new test does not cover that or I just got lucky and did not have one question on Auto Deploy... HA.
But there was networking questions on fail over methods and routing, and storage questions. i truley seemed more like a written VCAP test if I was going to write up a VCAP test as a multiple choice test.

Also nice this year is, If you’re VCP5-DCV or VCP6-DCV you don’t need to re-certify and your certification will not expire. You can pass 1 exam to be VCP6.7-DCV 2019 without going through mandatory training as a new candidate or someone with VCP4-DCV.  I was VCP5 and thought my VCAP 5 trumped the VCP certification...BUT I was wrong.
You can have an active VCAP certification and an expired VCP, so before 2019 VMWare wanted me to take the Deploy class over again just to get my VCP 6.5.  Well I was not going to do that and once I heard they were going to change that in 2019 I decided to wait.

On think I would recommend is getting a study guide, follow https://www.vladan.fr/
They have good study guides, also Hands on Labs for anything your not familuar with.  https://labs.hol.vmware.com/HOL/catalogs/ Good Luck Testing and getting Certified...

Thursday, August 8, 2019

In the Beginning........




In the Beginning..

There was a beginning to a blog post at some time, this is mine......


Someone has to start somewhere with a blog and I have told myself I was going to do this a long time ago and just never did. now I am finally working it and trying to come up with informative content.



Stay Tuned !!!!